1.800.833.7958
► Español
► 中文
Water Flow Measurement Meters
Flow measurement is the quantification of bulk fluid movement. Flow can be measured in a variety of ways. Positive-displacement flow meters accumulate a fixed volume
of fluid and then count the number of times the volume is filled to measure flow. Other flow measurement methods rely on forces produced by the flowing stream as it
overcomes a known constriction, to indirectly calculate flow. Flow may be measured by measuring the velocity of fluid over a known area.
Seametrics PE202 Magmeters
The PE202 Magmeter is designed for measuring fluids in low-flow applications. With no moving parts, the PE202 can handle liquids containing particulates without clogging or jamming. It features a compact design that can be easily installed in small spaces. Made with a PVDF body and PVDF carbon fiber-filled electrode, the PE202 is corrosion resistant and compatible with a wide range of chemicals. Outputs and power are provided through a 20 foot cable with 8-pin female round connector. Call 1.800.833.7958 Seametrics PE202 Magmeter Specifications |
Seametrics S-Series Low Flow MetersImpeller Flowmeters 
SPT and SPX low flow meters are an economical choice for measuring fluid flow rates. These versatile impeller flowmeters are available in multiple nominal female NPT thread sizes. They employ jewel bearings and Kynar rotor with tungsten carbide shaft to allow for very low flow rates and superior life expectancy. Call 1.800.833.7958 Seametrics S-Series Low Flow Meter Specs |
Pulsar PTFM 6.1Portable Transit Time Flow Meter 
Whether you need new flow measurement or to prove that existing systems are performing property, the PTFM 6.1 provides accurate, non-invasive flow measurement in the most challenging industrial environments and applications. With new and more powerful signal processing hardware, rugged IP67 design, and three interchangeable transducer sizes, the PTFM 6.1 is the right choice for on-the-go or long-term flow measurement applications. Call 1.800.833.7958 Pulsar PTFM 6.1 Specifications |
|
Seametrics WMP-Series Flanged Flow Meters
WMP-Series flow meters are economical plastic bodied flanged magmeters making them light weight and easy to install. WMP meters are available for 1 inch, 2 inch, and 3 inch pipe, and feature electrodes resistant to fouling. The polypropylene flow tube offers corrosion resistance for a wide range of fluid characteristics. WMP require minimal straight pipe requirements allowing these meters to be used in configurations where there is little space between pipe bends. With an included display, select from battery operated or externally power options. Call 1.800.833.7958 Seametrics WMP-Series Flanged Flow Meters Specifications |
Seametrics MJ/MJH-Series
|
Global Water FP111/FP211/FP311 Flow ProbesDigital Water Velocity Meter 
Global Water Flow Probes are highly accurate water velocity instruments for measuring flow in open channels and partially filled pipes. The water velocity probe consists of a protected water turbo prop positive displacement sensor coupled to an expandable probe handle with a digital readout display. The water flow meter incorporates true velocity averaging for the most accurate flow measurements. Use for measuring flows in rivers and streams and monitoring velocity in ditches and canals. Call 1.800.833.7958 Global Water FP111/FP211/FP311 Flow Probes Specifications |
|
Seametrics iMAG 4700-Series Flanged Flow Meters
The iMAG-Series flow meters are reliable flanged flow instruments available for 2 inch to 12 inch inline pipe installations. They feature electrodes that are designed to discourage fouling. iMAG meters require minimal straight pipe requirements allowing these meters to be used in configurations where there is little space between pipe bends. Available in a battery only and AC/DC option, with a remote display configuration. Call 1.800.833.7958 Seametrics iMAG 4700-Series Flanged Flow Meters Specifications |
Seametrics WT-Series
|
||
Seametrics EX90-Series Electromagnetic Flow Meters
EX90-Series insertion flow meters are suitable for installations with a wide range of temperature, pressure, and environments that are corrosive or with debris. EX90 meters are available 4 inch to 12 inch pipe installations, and feature an electrode resistant to fouling. Includes a battery powered programmable controller with display, and output signal to remote devices. Call 1.800.833.7958 Seametrics EX90-Series Electromagnetic Flow Meters Specifications |
Seametrics FT400-Series
|
||
Seametrics EX100/200-Series Insertion Flow Sensors
EX100 & EX200–Series flow meters are adjustable depth insertion magmeters suitable for installations with a wide range of temperatures, pressure, and chemical conditions. EX-Series meters are available for 3 inch to 48 inch pipe installations, and feature an electrode resistant to fouling. The EX-Series is also available with a hot-tap model that can be installed or serviced without shutting down the line. These sensors are compatible with external PLC controllers or directly mounted to a FT430 or FT440 Seametrics display. Call 1.800.833.7958 Seametrics EX100/200-Series Insertion Flow Sensors Specifications |
Seametrics IP100/200-Series Insertion Flow Sensors
IP100 & IP200-Series are adjustable depth insertion mechanical flow meters suitable for installations with a wide range of temperatures and pressure in clean water conditions. IP-Series meters are available for 3 inch to 40 inch pipe installations, and feature a non-drag hall-effect sensor giving these meters the widest flow range of any paddlewheel type instrument. The IP-Series is also available with a hot-tap model that can be installed or serviced without shutting down a pressurized line. These sensors are compatible with external PLC controllers or a directly mounted FT430, FT440 or FT450 remote Seametrics display. Call 1.800.833.7958 Seametrics IP100/200-Series Insertion Flow Sensors Specifications |
||
Seametrics EX800-Series Insertion Flow Sensors
EX800-Series insertion electromagnetic flow sensors are fixed depth meters suitable for installations with a wide range of temperature, pressure, and environments that are corrosive or with debris. They are designed for use in conductive liquids and can be installed in 1 inch to 12 inch pipe. EX800 are compatible with external controllers or directly mounted to a FT430 or FT440 Seametrics display. Select from a variety of tee-fittings that match installation pipe materials. Call 1.800.833.7958 Seametrics EX800-Series Insertion Flow Sensors Specifications |
Seametrics IP800-Series
|
