1.800.833.7958
► Español
► 中文
Rental Remediation Equipment
The selection of a hydrocarbon recovery system and its associated equipment is based on specific remedial objectives, design constraints, and site conditions. Hydrocarbon recovery systems are chosen to satisfy remedial objectives involving the control of petroleum hydrocarbon migration, maximum free product recovery, and simultaneous free product and vapor phase collection. Design constraints governing the selection of recovery systems may be site specific.
Geotech designs and builds remediation equipment for the following types of free product recovery:
| Free Phase Hydrocarbon Remediation Equipment |
 |
- Active Skimming Systems that utilize pneumatic or electric pumps that pump separated product up to the surface and into product recovery tanks automatically.
- Electrically Operated Systems that use sensor probes to locate the hydrocarbon layers in water and then pump only the product up to the surface and into product recovery tanks.
| Vapor Phase Hydrocarbon Remediation Equipment |
 |
- Soil Vapor Extraction Systems (SVE) for the removal of hazardous vapors from contaminated soil.
- When system controls and logic are required when interfacing SVE equipment, Geotech can provide you with a Geotech Environmental Control Module (GECM) to operate and monitor all your equipment at one site. Each device is controlled with a HAND/OFF/AUTO (HOA) switch. During normal operation, all devices are set to AUTO for continuous run time.
| Dissolved Phase and Total Fluid Remediation Equipment |  |
- Grundfos Redi-Flo3™ electric submersible pumps that pump polluted water to the surface for treatment.
- Pneumatic Remediation Pumps that pump to the surface dissolved hydrocarbons, leachate and condensate.
- LO-PRO™ Air Stripper water treatment systems for the separation and removal of dissolved phase hydrocarbons from groundwater.