1.800.833.7958

 

sales@geotechenv.com

Español

中文

 

Rental Pneumatic Free Phase Hydrocarbon Remediation Equipment

Active skimming systems that utilize pneumatic pumps to automatically pump separated product up to the surface and into product recovery tanks. This equipment can recover LNAPL to a sheen with systems using floating oleophilic/hydrophobic intake filters. Very little water is produced.

Geotech active pneumatic free phase recovery systems feature low operation and maintenance costs, and durable pumps.

Geotech SpOILer

SpOILer Pneumatic Bladder Pump with 2" & 4" Skimmers
SpOILer Pneumatic Bladder Pump
with 2" & 4" Skimmer Attachment Options

The SpOILer Controllerless Recovery System (CRS) is an efficient product recovery system designed to recover floating hydrocarbons from 2" (5cm) and larger wells and sumps. The SpOILer utilizes an internally regulated pneumatic bladder pump combined with a floating skimmer attachment. This system tracks water level fluctuations in excess of 16" (41cm) with the 4" (10cm) skimmer while removing product to a sheen. This system is extremely flexible for use at a variety of sites, with skimmers available to recover product ranging from gasoline to gear oil over several available travel ranges.


More Information

Geotech Guzzler Total Fluids

Geotech Guzzler

The Geotech Guzzler is an easy-to-install product recovery system designed for shallow recovery operation with up to 25 feet (7.6m) of suction lift. The pump is usually mounted near the well head on a post or in a 12" (30.5cm) minimum sump and will deliver approximately 0-4 GPM (0-15 LPM) while using 2-6 CFM (.06-.17cmm) of air, depending on the suction lift, pumping rate, and total discharge head.


More Information

Geotech Product Recovery System (PRS)

PRS Pneumatic Bladder Pump and 2" & 4" Skimmers
PRS Pneumatic Bladder Pump
with 2" & 4" Skimmer Attachment Options

The Geotech PRS (Product Recovery System) is a product recovery system that incorporates a pneumatic control panel with a downwell stainless steel pneumatic bladder pump coupled with a unique floating skimmer attachment. The skimmer attachment consists of an oleophilic/hydrophobic buoy that allows free floating product to be skimmed down to a sheen.


More Information

Geotech Solar Sipper

Solar Sipper Control Panel and Solar Panel
Control Panel with Pressure/Vacuum Pump
and Optional Solar Panel

The Geotech Solar Sipper is a solar powered remediation system, designed for remote applications where electrical power is either not available or not economically feasible to provide. The compact, easy to install features make this unit an industry favorite!

The Geotech Solar Sipper can effectively extract fluids from depths to 180 feet (55m) below ground surface and recover viscous hydrocarbons such as 90 weight oil when a fixed intake is utilized.

Telemetry Packages Available


More Information

Geotech AC Sipper

AC Sipper Control Panel with Pressure/Vacuum Pump
Control Panel with Pressure/Vacuum Pump
2" & 4" Skimmers and Downwell Pump
2" & 4" Skimmers and Downwell Pump

The Geotech AC Sipper is a Single-Phase, 110-220V AC, powered remediation system, designed for recovery applications where electrical power is available. The Geotech AC Sipper can effectively extract fluids from depths to 180 feet (55m) below ground surface and recover viscous hydrocarbons such as 90 weight oil when a fixed intake is utilized.

Telemetry Packages Available


More Information

Geotech PRS Control Panel

Geotech PRS Control Panel

The PRS (Product Recovery System) Control Panel can be used with most bladder/positive air displacement pumps. The dual timers can be adjusted to vary the intake and discharge cycle time. The pneumatic Tankfull Shut-Off Sensor shuts off the pump when the recovery tank is full. The system will not restart until the manual reset is pressed.


More Information

Geotech GEOTFSO Pneumatic Tankfull Shut-Offs with Manual Reset

Geotech GEOTFSO Pneumatic Tankfull Shut-Off PVC SensorGeotech GEOTFSO Pneumatic Tankfull Shut-Off Stainless Sensor
  PVC Sensor Tube
with 50' of Tubing
Stainless Steel Sensor Tube  

The Geotech Pneumatic Tankfull Shut-Off controller is a self contained system which is used to turn off the air supply to pneumatic pumps or other pneumatic controllers. It is activated when a high liquid level or pressure increase in a recovery tank exists.

More Information