Geotech GECM (Geotech Environmental Control Module) Pneumatic Pump Controller

The GECM Pneumatic Pump Controller is a unique pneumatic pump control system used for operating any downwell pneumatic remediation or sampling pump. Systems can be configured for either AC mains power or a 12VDC battery with an attached solar panel and battery charger. When the system is properly outfitted it can handle pressures up to 150 PSI (10.3 bar). Maximum depth to fluid pumping capability is 330 feet (100 m) below ground surface. Total fluid pump maintenance is greatly reduced by simplifying the downwell components and placing the timing and control mechanisms at the surface. The system can be configured to operate up to 8 wells per module. Multiple pump controls can be placed remotely at or near well heads with the air supply placed at a central location; maximizing compressed air efficiency.

More Information

Geotech GECM (Geotech Environmental Control Module) with Telemetry

Stay in touch with deployed remediation systems via SMS (text message) Telemetry embedded within Geotech Environmental Control Modules. Systems with Telemetry are optimized for simple send and receive queries that make remote sites convenient to monitor.

Systems are connected through a cellular network and accounts are managed through Geotech. Costs will depend on size of systems, frequency of alert conditions and commands, and location relative to cellular service. Antenna types will depend on location and proximity to cell towers.

Control panels may be queried for status updates and to respond to alert conditions via simple commands.

More Information

Geotech Tankfull Shut-Off

The Geotech Pneumatic Tankfull Shut-Off controller is a self contained system which is used to turn off the air supply to pneumatic pumps or other pneumatic controllers. It is activated when a high liquid level or pressure increase in a recovery tank exists.

More Information

SES Simplex Series Control Panels

Weatherproof Controllers with Alarm

Superior quality Simplex liquid level controller, automatically maintains pump operation, includes high level alarm warning for a variety of sump, effluent, sewage and water transfer applications.

• Rugged NEMA 4X construction withstands even the most severe weather conditions and prevents corrosion
• Hinged door with lockable stainless steel latch for safe operation indoors and out
• High level alarm circuit includes spring loaded through door mounted silence switch for manual silence of alarm horn
• Through door mounted pump run light
• Top mounted high intensity flashing red light
• Pulsating, corrosion proof alarm horn
• Color coded wiring, screw type terminals and plug-in sockets, ensure ease of field servicing
• Field wiring diagram, panel schematic and installation instructions included
• Panel can be wired for a single power feed for pump and control circuit or the control circuit can be wired to a separate power supply to insure alarm integrity in case of a tripped pump breaker
• Auxiliary alarm contacts provided for remote alarm connection
• Entire unit is UL and CUL listed

Call 1.800.833.7958

SES Simplex Control Panel Specifications

Coyote Pump Protectors

The Coyote Pump Protector protects pump motors by automatically shutting them off when they are at risk of low voltage, overload, rapid cycling, or running dry.

• Easy installation and set-up
• Automatically resets itself after dry run condition
• Protects both 2 and 3 wire motors from 1/3 to 2 HP
• Protects pumps by shutting them off due to:
  - Failure to pump fluid due to gas or air lock
  - Clogged inlet, or lack of fluid
  - Low voltage
  - Rapid cycling overload
• Restarts automatically with adjustable timer
• Weather-proof enclosure protects inside wiring from outside elements
• Exceptional flexibility:
  Operates alone, with pressure or float switches, or tank pump-up controls
• Three phase models available upon request

Call 1.800.833.7958

Coyote Pump Protector Specifications
Coyote 3 Phase-All Instructions
Coyote Single Phase 230V Instructions