Geotech AR4 4" Auto-Reclaimer

Total Fluids Recovery Pump

The AR4 is designed to pump floating hydrocarbons, leachate, and condensate in total fluids applications. The AR4 is operated automatically, and needs no controller. Everything needed to operate the system is built into the pump. The design withstands the harshest and most corrosive environments such as landfills or mines.

Features
Specifications
Options
Well Caps & Accessories
Compressors & Regulators
Downloads

Intrinsically safe design and approved for hazardous environments
Fits 4" or larger diameter wells
Ability to pump from 250' below ground
Can pump particles up to ⅛" diameter
Consistently pumps fluids as light as 0.70 SpG reliably
New adjustment-free valve mechanism – no magnets
Improved float design for maximum buoyancy and chemical compatibility
Optimal working pressures as low as 1 psi above head pressure
Standard light-weight composite housing, corrosive resistant 316 stainless steel and PVDF parts for less maintenance
Fast and simple disassembly for easy maintenance

	SHORT/LOW ACTIVATION	LONG	EXTENDED
Outside Diameter:	3.5" (8.9 cm)
Lengths Up To:	48" (122 cm)	60" (152 cm)	72" (183 cm)
Weight:	13.5 lbs. (6 kg)	15.6 lbs. (7 kg)	17.7 lbs. (8 kg)
Minimum Activation Level: Bottom Fill* Top Fill*	35" (89 cm)/17" (43 cm) 42.5" (108 cm)	47" (119 cm) 54.5" (138.43 cm)	59" (150 cm) 66.5" (169 cm)
Operating Pressure Range:	10-120 psi (0.7-8.5 kg/cm²)
Maximum Operating Temp:	220°F (104°C)
Fluid Volume/Cycle*:	.7 gal. (2.6 liter)	1.0 gal. (3.8 liter)	1.5 gal. (5.6 liter)
Maximum Flow Rate**:	8.5 gpm (32 lpm)
Standard Fittings: Fluid Discharge Air Supply Air Exhaust	SS Barb ¾" x ¾" MPT ⅜" x ⅜" MPT ½" x ⅜" MPT
Materials of Construction:	Includes: SS316, FRP, FPM, PVDF, HDPE, PTFE, Viton®
Specific gravity and viscosities will alter specifications. Flow rates will vary with site conditions. **Activation levels shown above reflect activation levels for pumps with a bottom or top and bottom inlets. To determine the activation level for a flat bottom intake, subtract 5" (12.7 cm) from the minimum activation level measurement above.

AR4 Short, Bottom Inlet 10' (3m) Submergence, ¾" (19mm) ID Hose	AR4 Long, Bottom Inlet 10' (3m) Submergence, ¾" (19mm) ID Hose
AR4 Extended, Bottom Inlet 10' (3m) Submergence, ¾" (19mm) ID Hose

Pneumatic Cycle Counter

The Pneumatic Cycle Counter is mounted inline after the filter and allows you to total the volumes pumped and determine service and maintenance schedules.

Cycle Counter Specifications:
Model	GEOPC350
Material	464 Naval Brass
Size	5" L x 2" W
Thread Type	¼" FPT
Pressure Range	40-275 psi
No. of Counts Before Rollover	999,999
Air Supply Tubing Sizes:	⅜" ID	½" ID
Minimum Distance To Pump	15'	15'
Max. Distance From Pump	350'	300'

Tubing
Nylon 12:
Air Supply		⅜" ID x ½" OD
Exhaust		½" ID x ⅝" OD
Discharge		¾" ID x 1" OD
Minimum Bend Radius		24"
Maximum Pressure		330 psig @ 70°F
Maximum Continuous Length		500'
Poly:
Air Supply		⅜" ID x ½" OD
Exhaust		½" ID x ⅝" OD
Discharge		¾" ID x 1" OD
Minimum Bend Radius		24"
Maximum Pressure		120 psig @ 70°F
Maximum Continuous Length		300'

AR4 Well Caps

Standard Slip
Penetrations, with safety cable hanger
Available for 2, 3, 4, 6, and 8 inch diameter wells
Compression Slip
Compression fittings, with safety cable hanger
Available for 2, 3, 4, 6, and 8 inch diameter wells
Vacuum Caps
Potted well cap for a complete vacuum seal
Barbed style fittings, with safety cable hanger
Available with quick-connect fittings
Available for 2, 3, 4, 6, and 8 inch diameter wells

Standard Fittings Provided:
Air – ⅜" Barb
Exhaust – ½" Barb
Discharge – ¾" Barb
Custom well caps and quick-connect fittings available upon request.

Optional Quick-Connect Fittings